|
Features
• 8 Channel BNC Camera Input
• 2 Channel BNC Monitor/VCR Output
• Duplex Operations
• Support Network: Static, DHCP, PPPoE.
• USB2.0 Port For Backup and Playback (Optional)
• VGA Outpu (Optional)
• NTSC / PAL
• Video Loss Alarm
• Motion Detection With Area Setting
• PTZ Control with RS485 Port
• 8 Sets NO / NC Sensor Input
• 1 Alarm Output (2A 28VDC / 2A 125 VAC)
• Two ATA - 100 Hard Disk Interface, Support Over 500GBytes
• Time Schedule Record / Sensor Triggered Record / Motion Triggered Record / Motion and Sensor Triggered Record
• IR Remote Controller
Specifications:
|
Model Number |
KT32818V |
|
Video Input Format |
NTSC / PAL : Composite BNC 8CH |
|
Display Resolution |
NTSC : 640x448 ; PAL: 640x544 |
|
Recording Frame rate
& Resolution |
NTSC : Max. 30fps / 640x224 (Half D1) |
|
PAL : Max. 25fps / 640x272 (Half D1) |
|
|
Compression Method |
Enhanced - MJPEG (12-20K Bytes/Frame) |
|
HDD Support |
Over 500GByte, ATA - 100 Interface HDD x 2 |
|
Estimated Record Length |
120G Hard Disk @ 50 fps @ Normal Quality
(120*1024*1024 KByte) ÷ (50*15*60*60) = 46 Hours |
|
Search Method |
Time & Event |
|
Sensor, Alarm |
8 Input (Normal Open / Normal Close)
1 Output (Alarm) (12 Pin DIP Switch)
Camera Signal Loss Alarm
2 Pin for RS485 Control Pan/Tilt/Zoom |
|
PTZ |
PELCO-D / PELCO-P |
|
USB |
Optional (For Media Backup) |
|
VGA |
Optional / 800*600, 1024*768, 1280*1024 |
|
Dimensions(L×W×H) |
400mm(L)×250mm(W)×52mm(H) | |
